For Bonding high quality fabric, foam, pu leather and etc materials.
It is mainly used as the foam-fabric or fabric-fabric lamination in lingerie industry. It adopts the sprayer guns to spray the glue
over the materials automatically. It is especially suitable for laminating various high performance and super soft materials.
It is the best choice for laminating the high-quality materials for seamless lingerie.
PU foam, various fabrics (Lycra, microfiber, spandex, mesh fabric, nonwoven fabrics), PVC, EVA, TPU film, Insole boards and etc
Mainly applied in lingerie industry, using soft and/or elastic or non-stretch or light / heavy fabric or fiberfill with fabric or pu
foam with foam, or fabric with foam with fabric.
1- Easy to operate, Comptetive price, Less Glue Adhesive consumption.
2- Without heating device ( cold lamination)
3- Glue coating uniformly and saving glue;
4- Good bonding and lamination effect;
5- Washable and durable;
6- Soft hand-feel;
7- High temperature tolerance;
8- Non-yellowing and Environmental.
1. Air Pressure Electronic Alarming System:
When encounter ultra-low air pressure, the spray gun will automatically be started using the electronic alarming device and stopped working. It can prevent the unnecessary defective products caused by the air pressure. This alarming system plays am important role in ensuring the good atomization effect, decreasing the waste of glue, and making sure the laminated products to be glued uniformly and bonded firmly with soft hand feel.
(Remarks: if the air pressure is low, it easily generate the spray granulated sundries, it is not easy to be atomized and the atomization effect is bad and waste the glue)
2. Comprehensive security system:
The whole machine equipped with automatic safety rope device, in case of emergency, the rope can be immediately pulled and stopped the working. It makes sure the working to be safe and reliable.
3. Constant tension winding system:
The remarkable feature of this machine is with an automatic winding inflatable shaft device. It can control the speed automatically according to the big or small rolls when the laminated products winded & rolled up, keeping the winding to be at tension-free status. In this case, the feeding materials can be protected without any damages and loose so as to achieve the best bonding effect. (Such system instead of traditional winding method with two rolls)
4. Automatic cold wind drying device:
Shortening the curing time, making the upper& lower layer winding to be easily separated, ensuring the quality.
5. Environmental 304 High Pressure Glue Barrel:
The glue barrel is made of imported 304 stainless materials. The glue pours into such barrel, easy to use and change the glue. The glue poured into such barrel, the glue quality can be without any affection outside the air, needn’t clean, decrease the waste and improve the utilization rate.
6. Automatic Deviation Rectify Device:
Adjusting the winding, keeping the materials to be normally rolled and winded by automatic deviation rectifying device, increasing the productivity.
7. Automatic Deviation Rectify Device for Conveyor Belt:
Automatic-adjustment for conveyor belt, preventing the conveyor belt from being deviated, making sure the belt to be run normally and increasing the conveyor’s working life.
Max Working width
Our Services & FAQ
1. MOQ: 1 set
2. OEM & ODM can be acceptable.
3. We own all the original R & D Technology and Proficient Experience in this field over 13 years.
4. All the Moulds can be customized according to your supplied samples.
CNC Made or Manual Made to be Optical.
5. The Molding Table Size can be bigger customized if required.
6. The Molding time and temperature can be preset and adjusted freely through the timers and temperature controllers when we mold / press different materials.
7. All the digital meters are easy to operate.
8. All the spare parts can be matched to supply.
9. All the electric fittings and pneumatic parts used in our machinery are with high-quality.
10. All the raw materials (machine frame, machine fittings and etc) are processed by our own factory.
11. We guarantee there is absolutely without jerry-built.
12. Good & Timely After-Sale Services.
13. Engineers & Technicians can be dispatched to buyer's plant.
Company Info & Workshops & Production Sites
We are the 1st professional manufacturer & supplier of underwear machinery in Shantou, China Mainland. Besides, we also have own bra cup factories located in Xiamen City and Dongguan City. We can supply 400~500 sets of machinery monthly, and 1.5~2.0 million pairs of bra cups/pads in each factory.
Packaging & Shipping
It will divided into several parts to load into the container.
If above details are still not clear for you, kindly please contact me without delay!
Looking forward to cooperating with you for long term!